BPTBL - 93215, ALL PURPOSE ETP CUTTING FLUID
- MSDS: BPTBL
- Manufacturer: PREMIER INDUSTRIAL CORP
- Product Name: 93215, ALL PURPOSE ETP CUTTING FLUID
- National Stock Number: 9150-00N032548
Product Identification
Product ID:93215, ALL PURPOSE ETP CUTTING FLUID
MSDS Date:08/28/1989
FSC:9150
NIIN:00N032548
MSDS Number: BPTBL
Responsible Party
CLEVELAND, OH 44103
US
Emergency Phone: 216-391-8300
Info Phone: 216-391-8300
Preparer: G.F.S
Cage: 18399
Contractor
Telephone: 216-391-8300
Cage: 18399
Ingredients
HYDROTREATMENT); (PETROLEUM OIL).
RTECS: 9999999ZZ
MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY
CAS: 64742-63-8
RTECS: PY8038000
Fraction By Weight: 65%
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5MG/M3;10 STEL(MIST)
Hazards
LD50 LC50 Mixture:SEE INGREDIENT 1
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRODUCT IS NOT A PRIMARY SKIN OR EYE
IRRITANT. CHRONIC IRRITATION MAY OCCUR AFTER PROLONGED AND REPEATED
CONTACT WITH SKIN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE: IMMED FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES
& CALL PHYSICIAN. SKIN: WASH THOROUGHLY WITH PLENTY OF SOAP AND
WATER. INHAL: REMOVE TO FRESH AIR. INGEST: SEEK PHYS IMMED. SHOW
MSDS OR L ABEL, DO NOT INDUCE VOMITING.
Fire Fighting
Flash Point:450F,232C
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:CLEAN UP WITH ABSORBENT MATERIAL. DISPOSE OF
AS A NON-HAZARDOUS WASTE. CONTAIN AND PICK-UP WASTE MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID PRLNG/RPTD CONT W/SKIN. ALWAYS
READ & FOLLOW DIRECTONS ON PRODUCT LABEL.
Other Precautions:IN CASE OF ACCIDENT/ILLNESS, SEEK PHYS IMMED, SHOW
LBL/ MSDS. KEEP OUT OF REACH OF CHILDREN. ADDNL TECH DATA SHEETS
&/OR MATL SFTY DATA SHEETS ARE AVAIL UPON REQUEST. FOR PROFESSIONAL
& INDUSTRIAL USE ONLY.
Exposure Controls
Respiratory Protection:USE ONLY WITH ADEQUATE VENTILATION. USE
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:LOCAL: RECOMMENDED. MECH:REQUIRED.
Protective Gloves:SOLVENT RESISTALT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AVOID PROLONGED OR REPEATED CONTACT WITH
SKIN.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:680F,360C
Vapor Pres:NIL
Spec Gravity:0.99
Evaporation Rate & Reference:<0.1(H2O=1)
Solubility in Water:NIL
Appearance and Odor:TAN OPAQUE FLUID, W/PETROLEUM ODOR.
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:KEEP AWAY FROM HEAT AND FLAME.
Hazardous Decomposition Products:PYROLYSIS PRODUCTS. CO, CO2.
Disposal
Waste Disposal Methods:DISPOSE OF WASTES IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.